MK Welding Multi-GMAW 200 LCD PFC - Page 31

CONTENT
EN
§4.2.1 Set up installation for Stick Welding ..................................................................... 42
§4.2.2 Operation of the Stick welding method ................................................................ 43
§4.2.3 Stick（MMA）Welding ......................................................................................... 43
§4.2.4 Stick（MMA）Welding Fundamentals ................................................................ 46
§4.3 Installation & Operation for TIG Welding ............................................................. 48
§4.3.1 Set up installation for TIG Welding ...................................................................... 48
§4.3.2 Operation of the TIG Lift welding method .......................................................... 48
§4.3.3 DC TIG Welding ..................................................................................................... 51
§4.3.4 TIG Welding Fusion Technique ............................................................................. 53
§4.3.5 Tungsten Electrodes ................................................................................................ 55
§4.3.6 Tungsten Preparation ............................................................................................. 57
§4.3.7 Tig Gun switch control ........................................................................................... 59
§4.4 Operation environment ............................................................................................. 60
§4.5 Operation Notices ...................................................................................................... 60
§5 Welding trouble shooting .................................................................. 61
§5.1 MIG welding trouble shooting .................................................................................. 61
§5.2 MIG wire feed trouble shooting ............................................................................... 63
§5.3 DC TIG welding trouble shooting ............................................................................ 64
§5.4 MMA welding trouble shooting ................................................................................ 66
§6 Maintenance & Troubleshooting ...................................................... 68
§6.1 Maintenance ............................................................................................................... 68
§6.2 Troubleshooting ......................................................................................................... 69
§6.3 List of error code ....................................................................................................... 71
§6.4 Electrical schematic drawing .................................................................................... 72
Copyright © 2020 MK Trade GmbH, Wies, Austria
The contents of these User Manual are the sole property of the company MK Trade GmbH.
Passing on as well as copying of this document, the use and distribution of its content are
prohibited if not explicitly permitted. Contraventions are liable to compensation.
Subject to technical modifications and error.