MK Welding Multi-GMAW 200 LCD PFC - Page 46

OPERATION
15
EN
used.
6. Welding mode icon display interface: an interface displaying the icon of the welding mode
currently used (2T/4T).
7. Synergic parameter display interface: an interface displaying the synergic parameters currently
used (only available when MIG/MAG Synergic welding method is selected).
8. Multifunction display interface: an interface displaying the contents corresponding to those
selected by users, such as icons of welding method, welding mode and parameter, parameter values,
etc.
Note: 1. In the welding process, press the MENU key to return to the main interface and re-set
parameters, and then press the ENTER key to enter the welding interface;
2. In the function selection interface, rotate L Knob to select a welding method as
required and press L Knob two times to directly enter the welding interface.