Mini-Convectron Module Instruction Manual - 275513 15
Chapter 2 Chapter 2 Installation
2.1 Module Components
The Mini-Convectron module contains a Convectron convection-enhanced Pirani heat-loss gauge.
Figure 2-1 illustrates the module without the digital display. The module without the display has
either one or two setpoint relays.
Figure 2-2 illustrates the module with the 3-digit digital display. The module with the display has
either zero or two setpoint relays.
Figure 2-1 Mini-Convectron Modules without Digital Display
Figure 2-2 Mini-Convectron Module with 3-Digit Display
Explosive Environment
Using the module to measure the pressure of flammable or
explosive gases can cause a fire or explosion resulting in
severe property damage or personal injury.
Do not use the module to measure the pressure of flammable
or explosive gases.
Mini-Convectron module with
one setpoint relay, no display
Mini-Convectron module with
two setpoint relays, no display
Mini-Convectron module with
two setpoint relays, 3-digit display
Mini-Convectron module with
no setpoint relays, 3-digit display
To Next Page
Loading...
Need help?
General
