1
Windows
®
and Windows NT
®
are registered trademarks or trademarks of Microsoft
®
Corporation in the United States and/or other countries.
Adobe and Acrobat are trademarks of Adobe Systems Incorporated.
i486 and Pentium are registered trademarks of Intel Corporation in the United States.
AutoCAD
®
is registered trademark of Autodesk, Inc.
IBM is trademark of International Business Machines Corporation.
Other company names and product name are trademarks or registered trademarks of their respective holders.
Copyright © 2000 Roland DG Corporation
Table of Contents
To Ensure Safe Use........................................................2
About the Labels Affixed to
the AC Adapter and Unit ...................... 5
1 What You Can Do with MODELA .......................... 6
2 Check the Included Items ........................................ 7
3 Part Names ............................................................... 8
4 Setting Up and Connection ......................................9
5 Installing the Software ........................................... 11
Software That Can Be Used
with the MODELA ................................... 11
Setting Up the Program .................................... 12
How to Use Help .............................................. 18
6 Operation Guide [Cutting Section] ........................19
Create the Cutting Data ....................................19
Attach the Spindle Unit .................................... 22
Install the Cutting Tool.....................................24
Load the Workpiece..........................................26
Attach the Front Cover ..................................... 27
Powering ON.................................................... 28
Perform Surfacing ............................................ 28
Perform Cutting................................................ 33
When Cutting is Finished................................. 34
http://www.rolanddg.com/
7 Operation Guide [Scanning Section] ..................... 36
Attach the Sensor Unit .....................................36
Load the Object to Be Scanned
on the MODELA ...................................... 38
Attach the Front Cover ..................................... 39
Powering ON.................................................... 39
Setting Scanning Conditions
and Starting Scanning .............................. 39
Saving Scanned Data........................................43
Edit the Scanned Data ...................................... 43
When Scanning Is Finished.............................. 43
8 Overview of the Usage Guides .............................. 44
9 Software Guide ......................................................45
Driver for Windows 95/98/Me .........................45
Driver for Windows NT4.0/2000/XP ............... 47
MODELA 3D DESIGN ................................... 50
MODELA 3D TEXT ........................................ 52
MODELA Player.............................................. 54
Virtual MODELA .............................................54
Dr.PICZA ......................................................... 56
Dr. Engrave ...................................................... 57
3D Engrave.......................................................60
10 What to Do If... ...................................................... 65
11 Items That May Not Be Copied .............................67
12 Specifications......................................................... 68
To Next Page
Loading...