MODELA MDX-20 - 1 What You Can Do with MODELA

6
1 What You Can Do with MODELA
Cut material to make a shape
MODELA cuts materials for three-dimensional objects made with software.
You can also engrave plates using flat line-drawing data.
Create three-dimensional data from a shape
MODELA can scan the shape of a solid object and create three-dimensional data.
You can use this data to do things like changing the size or make use of a natural shape as part of another design.
Use software to
create a three-
dimensional object.
Cutting a
shape
Enter the parameters
for cutting the three-
dimensional object
(cutting parameters).
Perform cutting. Finished result.
Use software design
a line drawing.
Engraving
Enter the parameters
for engraving (engrav-
ing parameters).
Perform engraving. Finished result.
Prepare the three-
dimensional object.
Creating
data from
a shape
Enter the parameters
for scanning.
Perform scanning. Finished result.
3D Design etc. MODELA Player
Dr.Engrave etc. 2.5D Driver
Dr.PICZA Dr.PICZA