Moeller WINbloc eco PROFIBUS-DP Series - Page 124

Technical Data
120
05/01 AWB2700-1384GB
Technical Data
Electronics module DP16DI/P-ECO
Operating voltage (U
S
) 24 V DC
Permissible range 18 to 30 V DC
Indication LED green „RUN“
Operating current (I
S
) 70 mA
Potential separation to field bus 500 V
eff
/min
Inputs (Number) 16
Status ’1’
U
H
min/max
I
H
min/max
15 V DC/30 V DC
1,2 mA/4 mA
Status ’0’
U
L
min/max -5 V DC/5 V DC
Input delay approx. 0,5 ms
Synchronisation factor 100%
Indication LED green „1 to 16“
Diagnosis see chapter 8
Ambient temperature
- Operating temperature
- Storage temperature
- Relative humidity
0 to +60 °C
-20 to +85 °C
15 to 95 % without dewing
Field bus
Protocol PROFIBUS DP acc. to EN 50170
Transmission rates 9,6 kBit/s to 1,5 MBit/s
EMV Interference immunity acc. to EN 50082-1 and 2
Static electricity 8 kV air discharge, 6 kV relay discharge acc. to EN
61000-4-2
Electromagnetic fields 10 V/m acc. to ENV 50140
Burst 2 kV acc. to EN 61000-4-4
communication interfaces 2 kV, acc. to IEC 801-4
HF unsymmetrical 10 V acc. to ENV 50141,
interference output acc. to EN 50081-2,
requirements acc. to EN 55011, group 1, class A. For
use in living areas (living, business and commercial
areas, small business) an individual authorization is
required
International protection class IP 20 (DIN 40050/IEC 144)