Mounting/Dismounting
34
05/01 AWB2700-1384GB
Potential Distribution
With
WIN
bloc eco modules, it is sometimes necessary to duplicate
supplies. This can be performed using either direct wiring or cross
connections (ZQVs). The connection assignment for each module
can be found in the corresponding wiring diagram in this chapter.
Figure 14: Cross-connection for potential duplication
This photo shows how a cross connection is used for potential
duplication. In this example (16-channel digital output module), the
ZQV is inserted between the U
L1
and U
L2
terminals. This means that
only one power supply for the outputs needs to be connected to
U
L1
; the supply for U
L2
is looped via the inserted ZQV.
To Next Page
Loading...