Moore Industries SPA2 - Section 8: Ordering Information; Ordering Information

www.miinet.comMoore Industries-International, Inc.
- 85 -
User’s Manual
224-790-00K
May 2018
www.miinet.com
Section 8: Ordering Information
Programmable Limit Alarm Trips
SPA
2
SECTION 8
SECTION 8
Ordering Information
Unit Input Output Power Options Housing
SPA2
Programmable
Limit Alarm
Trip
HLPRG
Programs to accept:
Current: Any range
between 0-50mA
including:
0-20mA
4-20mA
10-50mA
Voltage: Any range
between 0-10Vdc
including:
0-5Vdc
1-5Vdc
0-10Vdc
TPRG Programs to
accept (see Table 4
for details - (Table 7.5
section 7 of manual):
RTD: 2-, 3- and
4-wire; platinum, copper,
and nickel
Thermocouple:
J, K, E, T, R, S, B, N, C
Ohms:
0-4000ohms
(Potentiometer,
4000ohms maximum)
Millivolts:
–50 to +1000mV
U Universal
accepts any
power input
range of
21.6-325Vdc
or 90-260Vac
-AO Analog output
(isolated and linearized)
scaleable for any range
between 0-20mA into
1000 ohms or 0-10V into
10 kohms (see
“Specications” for
additional information)
NOTE: Current
output can be user-set for
internal or external power
(source or sink)
-DPDT Relays are
double-pole/double-throw
(DPDT), 2 form C, rated
5A@250Vac, 50/60Hz
or 24Vdc, non-inductive
(2PRG output model only)
-FMEDA Unit comes with
Failure Modes, E󰀨ects
and Diagnostic Analysis
(FMEDA) data for
evaluating the instrument
for suitability of use in a
safety-related application
-VTD Standard Factory
Calibration with NIST Test
Data Report
DIN DIN-style
housing mounts
on 35mm
(EN50022) Top
Hat DIN-rails
FLB
Flange mount
bracket for
wall mounting
provides
a secure
mount for
high vibration
applications
When ordering, specify: Unit / Input / Output / Power / Options [Housing]
Model number example: SPA
2
/ TPRG / 2PRG / U / - AO [DIN]
2PRG Dual Relays
(Relays are
single-pole/double-throw
(SPDT, 1 form C, rated
5A@250Vac, 50/60Hz or
24Vdc, non-inductive)
4PRG Quad Relays
(Relays are
single-pole/double-throw
(SPDT), 1 form C, rated
5A@250Vac, 50/60Hz or
24Vdc, non-inductive)
Each relay individually
congures for:
High or Low Trip
Normally Open or
Normally Closed
Failsafe or Non-Failsafe
Accessories
Each SPA
2
order comes with one copy of our
Intelligent PC Conguration Software. Use the chart
below to order additional parts.
Part Number
750-75E05-01
Part Number
803-053-26
Part Number
804-030-26
Intelligent PC Conguration Software
(One copy provided free with each order)
Serial Conguration Cable for use in
connecting the SPA
2
to a PC
Fuse Protected, Non-Isolated USB
Communication Cable