Morbark BOXER 320 - Vibration Data; Noise Data

General Specications
6.2
Units English Metric
Hinge Pin Height (Fully Raised) 70 in. 1765 mm
Dump Height 54 in. 1372 mm
Ground Speed (Max) 3.4 mph 5.5 kph
Dump Angle 34 deg. 34 deg.
Reach 28 in. 711 mm
Tip Capacity 1250 lb. 567 kg
Operating Capacity, 35% of tip load. 438 lb. 199 kg
Operating Capacity, 50% of tip load. 875 lb. 397 kg
Weight (without Bucket)(*w/Bucket) 1850 lb. 839 kg
Ground Pressure 3.2 psi 22.0 kpa
Vibration Data
Engine rpm was set @ 3700 rpm. The hand - arm and whole body vibration measurements
were made with the operator present.
Vibration Test @ hand /arm: Declared value is 0.3 m/s
2
.
Vibration Test @ whole body: Declared value is 4.3 m/s
2
.
Noise Data
Tests were performed in accordance with EU Directive 2000/14/EC, in addition to ISO 3744
and ISO 6395. Engine rpm was set @ 3750 rpm. The noise measurements were made with
the operator present.
The declared value for the operator is 86dB L
PA
.
The Guaranteed SWL value is 103dB L
WA
.