12
Safety and warning labels on the system
components
Information and symbols, such as safety labels and signs,
attached to the system components must be observed.
These safety labels and signs must not be removed and
must be kept in legible at all times.
Obligations of the operating company and the
target group
• Never operate or continue to operate system
components with safety-relevant faults.
• Prior to their use, check all system components for
obvious damage and observe their functions in order to
detect potential faults.
• Malfunctions that adversely affect the safety must be
removed before continuing the operation. Otherwise, the
system must not be used!
• The correct installation and proper operation of the
system must be monitored by the operating company.
• The operating company must ensure that the technician,
the electrician and the user have read and understood
the instructions.
• Therefore, it is the responsibility of the operating
company and the user to ascertain the correct utilisation
of the product.
• Prior to driving, the driver must proceed with a visual
inspection and a functional test before using the system.
• Before the installation of the system components and
during their operation, compliance with the applicable
manufacturer's information and safety instructions of the
vehicle is mandatory.
• When using the system, compliance with the
recommended installation guidelines and manufacturer's
interface documentation is mandatory.
Personal protective equipment must be worn
• When working on the system components or on the
vehicle, the necessary personal protective equipment
must be worn.
• Not wearing personal protective equipment can result in
serious injury or death.
• Ensure all unauthorized persons have left and remain
outside the danger zone.
• For further information, the operator provides the
current, locally relevant guidelines for the occupational
safety and accident prevention.
To Next Page
Loading...
