6
Target group of these instructions
These operating instructions are intended only for trained
and authorized drivers / operators.
Only qualified personnel shall be permitted to proceed with
the installation and the electrical connections!
Applicable documentation
Compliance with the following applicable documentation is
mandatory:
• Installation guidelines and applicable standards.
• Technical specifications of the vehicle and the builder of
the vehicle body.
• Data sheets and operating instructions of the system
components.
• Motec System Bus (MSB 2.0) specification for systems
with CAN communication to the vehicle.
Declaration of Conformity
• As European distributor, we have followed the EU
Guidelines and legal rules & regulations and have
implemented a conformity assessment for all our
products. The assessment is compliant with the
requirements of the "Harmonised Standards".
• The CE label can be found on the product as well as on
the applicable product documentation.
• Upon request, we will gladly provide you the EU
Declaration of Conformity.
To Next Page
Loading...
