8
Safety
Introduction
This chapter provides an overview of all important safety
aspects for the protection of the personnel, and for the safe
and trouble-free use of the product from installation to
disposal.
• Non-compliance with these directions and the safety
instructions contained in this manual can lead to
considerable hazards to the user and may damage the
product.
• The product is designed and built according to the state-
of-the-art technology and the recognized safety
guidelines and standards. The operation of the product
is safe.
Intended use
• The Motec MVS System is a driver assistance system
can only be operated with a its system limits.
• The device provides the driver with a 270°/360° all-
round view from a bird's-eye perspective. Images
provided by the wide-angle cameras that are installed
on both sides, the front and rear of the
vehicle/machinery capture the surroundings.
In order to obtain the desired images, the MVS System
must be installed and operated compliant with these
operating instructions.
The driver/operator shall be responsible for the safe
operation of the vehicle at all times. This obligation
applies in particular if personnel remain in the danger
zone of the vehicle/machinery.
To Next Page
Loading...
