: MVCD1000-x / MVCD1001-x
The video control unit processes the images delivered by
the cameras to a 360° or 270° panoramic view.
The video control unit is available in two versions depending
on the vehicle connection:
MVCD1000-x
Analogue control signals are used to connect to the vehicle.
MVCD1001-x
A CAN bus is used to connect to the vehicle.
Camera
: MC7180N
The MC7180N wide angle camera is used for the 270°/360°
bird’s eye view system.
The 180° angle of view and the small design enable
adaptation to very different vehicle and visibility situations.
•
270° systems use three cameras.
•
360° systems use four cameras.
The cameras are connected to the video control unit via the
MKS cable and are supplied with voltage by the video
control unit.
To Next Page
Loading...
