Motocaddy M-TECH - Lower Bag Supports; EASILOCK Bag Attachment; Non-EASILOCK Bag Attachment

Page 14
LOWER BAG SUPPORTS
Fig 1 Fig 2 Fig 3 Fig 4
Lower Bag Support with EASILOCK
®
Bag
All Motocaddy trolleys are tted with the EASILOCK
®
bag attachment system. This securely attaches the bag, reduces twisting
and removes the need to use a lower bag strap.
1. If using an EASILOCK
®
compatible bag, please ensure that the supplied pins are tted to the bag base (g. 1)
2. If attached, remove the two lower bag support elastic straps by pressing and holding the back of the clip before pulling outwards (g. 2)
3. Align the cut out on the bag base with the lower bag support platform to align the bag pins with the holes on the trolley (g. 3)
4. Lower the bag until the pins locate with the two holes. You should hear a positive “CLICK” as the bag locks into position
Lower Bag Support with Non-EASILOCK
®
Bag
If you are using a non-EASILOCK
®
golf bag, please do not remove the two lower bag support elastic straps:
1. Position your bag so it is resting on the lower bag support platform and in the cradle of the upper bag support
2. Stretch the lower bag strap around the bag base and loop the rounded bar underneath the bag support hook (g. 4)