Motocaddy M-TECH - Folding Your Trolley; Folding Procedure

Page 13
FOLDING YOUR TROLLEY
Folding your Trolley
1. Release the lower latch (g. 1). The auto-open stand will also be activated
2. Fold the frame forward until fully extended (g. 2). The front wheel will automatically fold underneath
3. Release the upper latch and fold the handle back until the trolley is fully folded (g. 3)
4. Re-secure both latches. If you wish to stand the trolley upright, leave the auto-open stand out. Remember to ensure the
auto-open stand is pushed down if not being used (g. 4)
5. The wheels can be inverted to reduce the trolley width for transportation and storage (g. 5). See page 10 for details
Please ensure the auto-open stand is folded away when not in use to prevent damage.
When the trolley is folded with the battery installed, the power will automatically disconnect and the charging port will become
accessible. This is a safety feature to ensure the trolley cannot be switched on when folded during storage or transportation.
Fig 5Fig 1 Fig 2 Fig 3 Fig 4