EasyManua.ls Logo

Motocaddy M-TECH - Upper Bag Supports and Adjustment; Securing Upper Bag Supports; Adjusting Strap Tightness

Motocaddy M-TECH
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 15
UPPER BAG SUPPORTS / ADJUSTING THE BAG SUPPORTS
Fig 1 Fig 2 Fig 3 Fig 4 Fig 5
Upper Bag Supports
The upper bag support straps are secured in the same way as the lower straps using the following steps:
1. Stretch the elasticated strap around the bag & loop the rounded bar underneath the hook (g. 1)
2. Position the two placement straps centrally on your golf bag (g. 2)
Adjusting the Bag Supports
The bag support straps are manufactured from elasticated material to allow your golf bag to be held tightly in position.
The strap should be adjusted to be reasonably tight around the golf bag:
1. Unclip the elasticated straps from the housing by pulling outwards in the direction shown (g. 3)
2. Move the bar as required to tighten or loosen the strap tting. Pulling the bar downwards will tighten, upwards will loosen (g. 4)
3. Ensure that the straps are clipped back into the housing before use (g. 5)

Related product manuals