Page 16
STARTING, STOPPING & CHANGING SPEED
When the battery is initially connected, a Motocaddy logo graphic will be displayed,
followed by a blank screen for around 20 seconds to allow the processor to boot up.
Please do not attempt to restart the trolley during the booting procedure.
Starting, Stopping & Changing Speed
The main 'On/Off' button is used to start and stop the trolley, whilst also controlling
the speed, which can be adjusted while the trolley is stationary or in motion.
The trolley has 9 speed settings (1 to 9) with 1 being the slowest and 9 the fastest.
To increase the speed, rotate the 'On/Off' button clockwise, or anti-clockwise to
decrease the speed. The number of green bars surrounding the speed indicator
increases and decreases with the number.
To start the trolley, simply select your required speed setting and press the
'On/Off' button. The trolley will smoothly accelerate until it reaches the selected
speed and the speed indicator will change from white to green to indicate that
the trolley is under power.
To stop the trolley, simply press the 'On/Off' button again - there is no need to
reduce the speed setting. The speed indicator will return to white.
To Next Page
Loading...
