Procedure:
1 Remove the accessory connector cover.
NOTE: Applicable on Bluetooth wireless technology enabled models only.
2 Plug the audio accessory straight into the accessory connector on the radio.
3 Screw the audio accessory plug into the connector until it is tight and fully engaged with the
connector.
Figure 3: Connecting Wired Audio Accessory
4 Turn the radio on.
5 To check for audio through the audio accessory, press either the Battery Status, Menu, or
Volume Control button.
NOTE:
Lower the radio volume before placing the audio accessory in or near your ear.
The CLP Series radios offer various audio accessories. For detailed audio accessories
list, refer to http://www.motorolasolutions.com/CLP for information on approved
accessories.
68012000044-ED
Chapter 2 : Getting Started
12
To Next Page
Loading...
