Procedure:
1 Plug one side of the cloning cable micro-connector to the USB port of the MUC. Six USB ports
are available on top of the accessory pockets.
2 Plug the other end of the cloning cable to the USB port of the bluetooth headset for charging.
NOTE:
You can also charge your bluetooth headset with CLP Series MUC, part number
HKPN4007 (optional accessory) and cloning cable, part number HKKN4026 (optional
accessory).
Refer to the charging status light on your bluetooth headset leaflet.
To charge the bluetooth headset, refer to your bluetooth headset leaflet for charging
instruction.
3.11
Checking Battery Status
Procedure:
1 Short press and release the Power and Battery button.
The Smart Status Glow Ring and Voice Assisted Operation features show the radio battery
status.
Table 7: Battery Status
Battery Level LED Indication Color
High (70 –100 %) Green
Medium (30 – 70 %) Yellow
Low (10 – 30 %) Red
68012000044-ED
Chapter 3 : Battery and Charger
26
To Next Page
Loading...
Need help?
General
