Chapter 6
Advanced Radio Configuration
Advanced radio configuration feature allows you to configure settings from a pre-programmed list
without using a computer.
Advanced configuration mode allows you to customize the following settings:
• Channels
• Frequencies
• Codes (CTCC/DPL)
Frequencies allow you to select frequencies for each channel. Codes help minimize interference by
providing you with a choice of code combinations that filter out static, noise, and unwanted messages.
NOTE: This feature is an enhancement feature on CLP radios and may not be available on
previous shipping radios.
6.1
Entering Advanced Radio Configuration Mode
Prerequisites:
NOTE: For bluetooth models, ensure the wired accessory is connected or the bluetooth
headset is paired before entering advanced radio configuration mode.
Turn the radio off.
Procedure:
1 Press the PTT, + button and Power button simultaneously and hold for 3 to 5 seconds until you
hear a sound and the voice prompt Programming Mode.
The LED blinks green.
2 To select the settings you want to change, press the Menu button.
The followings are the settings that you can change:
• Channel (for multi-channel models)
• Frequency
• Code
The voice announcements indicate the menu items and their current settings.
3 To change the settings, press either the + or – button.
4 To go to the next menu item, press the Menu button.
5 To exit the Advanced Radio Configuration mode, press and hold the PTT button until you hear
a sound.
68012000044-ED
Chapter 6 : Advanced Radio Configuration
34
To Next Page
Loading...
Need help?
General
