EasyManua.ls Logo

Motorola DCS StarTac - Installation Introduction

Motorola DCS StarTac
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DCS 1800 starTAC CELLULAR TELEPHONE
68P09304A85-O JMCK10
54 19/07/97
1. INSTALLATION INTRODUCTION
The Motorola StarTAC Car Kit provides the user with
the capability of using their personal phone with full hands-
free operation whilst in a vehicle. The StarTAC Car Kit
provides power to the transceiver unit and allows rapid
charging for any rechargeable battery attached to the
phone.
When in the Car Kit the transceivers antenna is
automatically disconnected, and the RF routed via the RF
coaxial cable to an external antenna to enhance reception.
All of the phones functions are accessible via the Smart
Handset keypad.
When calls are placed, your unit will automatically enable
hands free operation. To make a hands free call, leave the
phone in the cradle, enter the number (or recall it from
memory), using the smart handset, then press OK.
To receive a call in hands free, simply press the OK button
of the handset. Switching between hands free and private
conversation mode is accomplished by lifting the handset
out of its hang up cup. To return to hands free, press the
MUTE key on the handset before replacing it in its cradle.
Other features include automatic entertainment mute (if
enabled and connected correctly), automatic answering
facility and constant keypad illumination.
When the phone is connected to the kit, any battery attached
is automatically charged. If the phone is turned off, the
battery continues to be charged, and depending on the
model, either the battery icon flashes, “Battery Charging”
shows in the display, or both.
Figure 1. StarTAC Hands Free Car Kit.

Table of Contents

Related product manuals