106
Repeater Ack Alert Use the UP/DOWN arrow keys to enable/disable this option. If this
feature is enabled, an alert will sound when the acknowledgment to
Manual Repeater Access is received.
The default is Enabled.
Emergency All the fields listed below will be visible only if this field is set to Enabled.
Use the UP/DOWN arrow keys to enable/disable Emergency operation
in the radio. If this field is enabled, the radio will be capable of
Emergency operation.
Emergency Tx Light This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, the LED will light up when an emergency
message is transmitted.
The default is Enabled.
Emergency Alert This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, an alert will be generated when the
emergency switch is pressed at a time that the radio is in a non-silent
emergency mode.
The default is Enabled.
Emergency Ack Alert This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, an alert will be generated when an MDC
emergency alarm acknowledgment is received.
The default is Enabled.
Silent Emergency This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, both audio and visual feedback from the
radio will be inhibited during an emergency silent alarm.
The default is Disabled.
Silent Emergency w/Voice This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, the radio will unmute to dispatch traffic only
after the silent alarm sequence is completed. No tones will be sounded.
The default is Disabled.