148
Sample Screens Reproduced on the following pages are several possible screen views
for the CHANNEL CONFIGURATION screen. These demonstrate
various combinations for Receive Squelch and Transmit PL field
settings.
CHANNEL CONFIGURATION screen
(Transmit Coding = DPL, Receive Coding = Carrier)
CHANNEL CONFIGURATION screen
(Transmit Coding = TPL, Receive Coding = Carrier)
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model :HO1SDC9AA3AN Use <Enter> key to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel......1 Programmed.......Yes
Rx Frequency (MHz)..........403.06250 Receive Squelch.......Carrier Squelch
Tx Frequency (MHz)..........403.01250
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL.......................DPL
Tx Inhibit On Busy Chan......Disabled DPL Code........................023
Stat-Alert/ATIS Sel-Call.....Disabled Power Level.......................Low
PTT ID.......................Disabled Repeater Access..............Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model :H01RDC9AA3AN Use <Enter> key to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel......1 Programmed.......Yes
Rx Frequency (MHz)..........403.06250 Receive Squelch.......Carrier Squelch
Tx Frequency (MHz)..........403.01250
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL.......................TPL
Tx Inhibit On Busy Chan......Disabled TPL Tone................67.0 Hz XZ
Stat-Alert/ATIS Sel-Call.....Disabled Power Level.......................Low
PTT ID.......................Disabled Repeater Access..............Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
To Next Page
Loading...
