Motorola HT-1000 - Page 156

150
CHANNEL CONFIGURATION screen
(Transmit Coding = DPL, Receive Coding = TPL)
CHANNEL CONFIGURATION screen
(Transmit Coding = Disabled, Receive Coding = DPL + Quik-Call II)
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model : H01RDC9AA3AN Use <Enter> key to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel......1 Programmed.......Yes
Rx Frequency (MHz)..........403.06250 Receive Squelch...................TPL
Tx Frequency (MHz)..........403.01250
TPL Tone................67.0 Hz XZ
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL.......................DPL
Tx Inhibit On Busy Chan......Disabled DPL Code........................331
Stat-Alert/ATIS Sel-Call.....Disabled Power Level.......................Low
PTT ID.......................Disabled Repeater Access..............Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL
MOTOROLA Radio Service Software Use <: keys to adjust value.
HT/JT1000/VISAR Model :H01RDC9AA3AN Use <Enter> key to go to next feature.
Serial:
CHANGE:CHANNEL
Channel Configuration
---------------------
Channel......1 Programmed.......Yes
Rx Frequency (MHz)..........403.06250 Receive Squelch......DPL/Quik-Call II
Tx Frequency (MHz)..........403.01250 Quik Call Type......Individual Call
DPL Code........................331
Talkaround...................Disabled
Rx Only Channel..............Disabled Transmit PL..................Disabled
Tx Inhibit On Busy Chan......Disabled
Stat-Alert/ATIS Sel-Call.....Disabled Power Level.......................Low
PTT ID.......................Disabled Repeater Access..............Disabled
MDC/STAR/ATIS Decode.........Disabled
F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
HELP CHAN PREVIOUS NEXT PRINT DEFAULT EXIT
OPTIONS CHANNEL CHANNEL