Motorola MC1000 Integrator Guide

Accessories 2 - 11
Figure 2-9 LANNDS1 Window
After using the Ethernet cradle the MC1000 must be placed in USB Client mode if ActiveSync is required.
1. Press F - CTRL - F - ESC to launch the Start menu.
2. Use the scroll keys to select Settings - Control Panel.
3. Press ENT.
4. Use the scroll keys to select the USBConfig icon.
5. Press ENT.
6. Press F - TAB to select the Port Mode.
7. Use the scroll key to highlight USB Client Mode.
8. Press ENT.
LAN Icon

Motorola MC1000 Specifications

General

Brand	Motorola
Model	MC1000
Category	Handhelds
Language	English