Status Indicators
This chapter explains the status indicators and audio tones
used in the radio.
LED Indicators
LED indicators show the operational status of your radio.
Solid Red
Radio is charging.
Blinking Red
Radio has failed the self-test upon powering up.
Radio is receiving an emergency transmission.
Radio is transmitting in low battery state.
Radio has moved out of range if Auto-Range
Transponder System is configured.
Radio encountered charging errors.
Indicates low battery capacity when the On/Off/
Information button is pressed.
Solid Green
Radio is powering up.
Radio is transmitting.
Radio is sending a Call Alert or an emergency
transmission.
Indicates full battery capacity when the On/Off/
Information button is pressed.
Blinking Green
Radio is receiving a call or data.
Radio is detecting activity over the air.
Radio is turned on and idle.
NOTICE:
This activity may or may not affect the
programmed channel of the radio due to the
nature of the digital protocol.
Double Blinking Green
Radio is receiving a privacy-enabled call or data.
Solid Yellow
Radio is monitoring a conventional channel.
Indicates fair battery capacity when the On/Off/
Information button is pressed.
Blinking Yellow
Radio is scanning for activity.
Radio is receiving a Call Alert.
English
Send Feedback 27
To Next Page
Loading...
