The radio automatically stops transmitting when the
cycling duration between hot mic and receiving calls
expires, if Emergency Cycle Mode is enabled.
The red LED blinks. The radio remains in
Emergency mode.
Receiving 5-Tone Emergency Alarm
A Software License Key sold separately is required to use
this feature.
When you receive an Emergency Alarm:
• A tone sounds.
• The red LED blinks.
• The display shows EMGY momentarily.
NOTICE:
If the decoded telegram contains an address or
status alias, the address or status alias is displayed
as "Address : Status Alias".
Lone Worker
This feature prompts an emergency to be raised if there is
no user activity, such as any radio button press or channel
selection, for a predefined time.
Following no user activity for a programmed duration, the
radio pre-warns you using an audio indicator once the
inactivity timer expires.
If there is still no acknowledgment by you before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm.
Only one of the following Emergency Alarms is assigned to
this feature:
• Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state, allowing voice
messages to proceed until action is taken. See Emergency
English
Send Feedback 49
To Next Page
Loading...
