3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.
Making Group Calls
Follow the procedure to make Group Calls on your radio.
1 Do one of the following:
• Select a channel with the active group alias or ID.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.The display shows the
group call alias.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
•
Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.The display shows the transmitting radio
alias or ID.
5
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Private Calls
A Private Call is a call from an individual radio to another
individual radio.
There are two ways to set up a Private Call. The first type
sets up the call after performing a radio presence check,
while the second type sets up the call immediately. Only
one of these types can be programmed to your radio by
your dealer.
English
32 Send Feedback
To Next Page
Loading...
