5 If asked for the Target selection, select one of the following:
• Private – enter the private number or press abc to choose the destination number from the contact list.
• Phone – enter the phone number or press abc to choose the destination number from the contact list.
Note: Your service provider can enable to send a Store and Forward message to a talkgroup.
6 Select Send, or press SEND key or PTT button.
Delivery Report
Delivery Report is an acknowledgment that the radio can request upon sending a message to an individual recipient.
You can define what type of Delivery Report your radio requests, or turn on/off this feature.
If the Delivery Report is received shortly after the message was sent, the radio:
• Displays a pop-up with one of the following messages:
- Message Sent – if no Delivery Report is requested (and when a Store and Forward message has been received
at the Store and Forward server)
- Message Delivered – if the Delivery Report is requested and the message has been received by the target radio
- Message Read
– if the Consumed Delivery Report is requested and the message is opened on the target radio
- Message Failed – if the Delivery Report is requested and the message has not been received by the target
radio within a defined time period
• Saves the Delivery Report in Outbox along with a copy of the message.
If the Delivery Report is received after a longer period of time, the radio:
• Saves the Delivery Report in Outbox along with a copy of the message.
• If Delivery Report Notifications functionality is configured by your service provider, the radio also:
- Temporarily saves a Delivery Report message in Inbox. The notification disappears after it is read.
- Displays New Message icon.
- Displays New Delivery Status notification screen (if possible).
Viewing Delivery Reports
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → Inbox.
3 Find a required message and select Read.
4 Press MENU key.
5 Select Delivery Status.
Configuring Delivery Reports
Prerequisites: Your service provider enabled the delivery report configuration.
Procedure:
1 From the home screen, press the MENU key.
2 Select Messages → New Message.
3 Press MENU key and select Delivery Report.
4 Select one of the following:
• None — the radio does not request any delivery report.
64 | Main Menu
Send Feedback | |
To Next Page
Loading...
