D-PTT Tones
This menu item contains the settings for the Double PTT feature.
The Double PTT feature allows you to send a tone pattern (single, double, or triple) when the radio is in idle or the
Group Call mode by pressing the PTT button twice.
After the D-PTT tone is played, the user can press and hold the PTT button once again to get the permission to talk.
Otherwise, if the user presses the PTT button while the D-PTT tone is played, it is ignored.
After the D-PTT tone is sent keeping the PTT button pressed, it results in permission to talk. The D-PTT tone is not
audible on a sending radio.
Note: This feature needs to be enabled by your service provider.
Setting D-PTT Tones
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Tones → D-PTT Tones.
3 Select one of the following:
• D-PTT Mode — Activates/deactivates D-PTT tone.
• Tone Style— Indicates how many times the D-PTT tone is played.
Display
This menu item allows you to adjust your radio display settings.
Setting Flip Display
When and where to use:
The feature is useful for a user who has to wear the radio on a shoulder, belt, or lapel and at the same time wishes to
read the display upside down.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Flip Display.
3 Select one of the following:
• On – to activate this feature.
• Off – to deactivate this feature.
Setting Font Level
When and where to use: To increase/decrease text size so you can adjust the interface readability to existing
conditions.
Procedure:
1 From the home screen, press the MENU key.
2 Select Setup → Display → Font Level.
3 Select one of the following:
• 1 – small font size
• 2 – medium font size
• 3 – large font size
Main Menu | 83
| | Send Feedback
To Next Page
Loading...
