146
2. Type your User PIN
When the User PIN is highlighted press
Select and type your User PIN on the next
screen then press OK.
3. Logging
From this point the request to logon is sent.
You can stop the logging process by
pressing Cancel. When the logging process
ends the display is changed to idle screen.
Log Off
You can change the state that you are logged on by pressing
> More... > RUI > Log Off from the idle screen. The
radio prompts to accept log off state or to deny it (if you
selected it by mistake).
Book On
Any radio (if the Book On is enabled by the
Service Provider) can be assigned by the
service provider to one person. You are
going to see only screen with your login and
the full service is granted from this point.
Book On Setup
Menu > Setup > Book on Setup
You have two options:
• Book on Accept -- radio is going to accept
all the book on requests.
• Book on Reject -- radio is going to reject
all the requests from the Service Provider
and user is not going to see any notification.
Colour blue of the display is when the user is in full service
mode. In other case the grey scale screen are displayed.
When the Book on feature is disabled by the Service Provider
user is not able to change Book on setup.
Back
Edit
RUI Logon
User ID: __________
User PIN:
RUI Logon
Logging ...
.................Cancel
MENU
.. OK
Book on as
<Jan>
Granted Assignment
period: 6 hours
Book on Accept
Book on Reject
Book on
Select
Back
To Next Page
Loading...
