Motorola PTP 500 Series - LAN Configuration; Figure 41 - LAN Configuration Page

7 Web Page Reference
86
7.5.2 LAN Configuration
The LAN configuration page (Figure 41) is used by the system administrator to configure the
PTP 500 Series Bridge’s LAN interface.
Figure 41 - LAN Configuration Page
All of the LAN Configuration attributes are non-volatile, so once set, they will be used by the
unit even after a power on reboot. The LAN Configuration page contains the following fields:
IP Address
Internet protocol (IP) address. This address is used by the family of Internet protocols to
uniquely identify this unit on a network.
Subnet Mask
A subnet allows the flow of network traffic between hosts to be segregated based on a
network configuration.