Motorola PTP 500 Series - Figure 37 - Alarm Warning Triangle; Home Page Alarm Display

7 Web Page Reference
74
System Clock
If SNTP (Simple Network Time Protocol) is enabled, or the clock has been set, then a system
clock attribute is displayed giving the date and time of the last page refresh. Section 7.10.8
“SNTP (Simple Network Time Protocol)” explai
ns how to enable SNTP and Section 7.10.9
“Setting the clock” explains how to set the clock.
7.2.1 Home Page Alarm Display
The home page is also used to display all outstanding major system alarms. Whenever
system alarms are asserted, a yellow warning triangle is displayed on web page navigation
bar. The warning triangle will be visible from all web pages. Clicking the warning triangle will
cause the web page to jump back to the system homepage. Figure 37 shows a sample alarm
scre
en.
Figure 37 - Alarm Warning Triangle