7 Web Page Reference
107
If a valid license key is not detected in the unit’s non-volatile memory then the user is
prompted to enter a valid key. PTP 500 Series bridge units are shipped as link pairs and, as
such, valid license keys are entered during the production process. To enter a license key,
simply type or paste the license key into the data entry box (Figure 55) and click the ‘validate
licen
se key’ button.
7.7.3 Installation Wizard Step 1 - Interface Configuration
Step 1 of the installation wizard requires the installer to enter the Internet Protocol (IP)
configuration (Figure 56).
Figure 56 - I
nstallation Wizard Internet Protocol Configuration
The Interface Configuration page contains the following fields:
IP Address
Internet protocol (IP) address. This address is used by the family of Internet protocols to
uniquely identify this unit on a network.
Subnet Mask
A subnet allows the flow of network traffic between hosts to be segregated based on a
network configuration. By organizing hosts into logical groups, subnetting can improve
network security and performance.
Gateway IP Address
The IP address of a computer / router on the current network that acts as a gateway. A
gateway acts as an entrance / exit to packets from / to other networks.
To Next Page
Loading...
