6 Installation
58
Figure 28 - Disconnecting the ODU
CAUTION
To prevent damage to the ODU while making or breaking the connection, ensure that
power is removed from the system at the PIDU Plus.
6.5.4 Routing the Cable
After connecting the cable to the ODU it can be routed and secured using standard cable
routing and securing techniques. When the cable is in place it can then be cut to the desired
length at the PIDU Plus prior to connection to the PIDU Plus.
6.5.5 Fitting a Lightning Protection Unit
If you have opted to fit a Lightning Protection unit, this should be installed by following the
manufacturer’s instruction. For recommended types see Section 5 “Lightning Protection”.
To Next Page
Loading...
