Motorola PTP 500 Series - Data Throughput Capacity

12 Data Rate Calculations
191
12.3 Data Throughput Capacity
Table 19, Table 20 and Table 21 show the data throughput rates (Mbits/s) that are achieved
when two PTP 500 ODUs are linked and the link distance (range) is 0 km. Use the curves in
Section 12.4 to adjust these figures to allow for link range.
Thro
ughput for Link Symmetry 3:1 is the same as that for 1:3, but the Tx and Rx data rates
are swapped.
All data rates are quoted in Mbit/s.
PTP 500 Lite data rates are half the PTP 500 Full rates given in this section.