8 Recovery Mode
153
Recovery Reason
Indicates the reason the unit is operating in Recovery mode. Possible reasons are “Recovery
button active” or “Invalid or corrupt image”
MAC Address
The MAC address shown here is the MAC address of the unit programmed during
manufacture.
8.2 Upgrade Software Image
The first step (Figure 92) is to use the ‘Browse’ button to locate the software image to be
downloaded. Once located the user should press the “Upgrade Software Image” button to
start the software download process.
During software download, progress is indicated by a pair of progress bars (Figure 93).
Figure 93 - S
oftware Download Progress Indicator Page
When the download is complete a page is displayed indicating the status of the software
download (Figure 94).
Figure 94 - S
oftware Download Complete Page
To Next Page
Loading...
