Motorola PTP 500 Series - Page 223

14 Remote Software Upgrade by TFTP
203
2. Monitor the values of the following tFTP attributes:
tFTPSoftwareUpgradeStatus: The current status of the TFTP software upgrade
process. Values:
o idle(0)
o uploadinprogress(1)
o uploadsuccessfulprogrammingFLASH(2)
o upgradesuccessfulreboottorunthenewsoftwareimage(3)
o upgradefailed(4).
Example:
snmpget_d.exe -v 2c -c public 10.10.10.10 .iso.3.6.1.4.1.17713.1.9.9.0
tFTPSoftwareUpgradeStatusText: This describes the status of the TFTP software
upgrade process, including any error details. Example:
snmpget_d.exe -v 2c -c public 10.10.10.10 .iso.3.6.1.4.1.17713.1.9.10.0
tFTPSoftwareUpgradeStatusAdditionalText: Used if tFTPSoftwareUpgradeStatusText
is full and there are more than 255 characters to report. Additional text describing the
status of the TFTP software upgrade process, including any error details. Example:
snmpget_d.exe -v 2c -c public 10.10.10.10 .iso.3.6.1.4.1.17713.1.9.11.0
3. When the upgrade is complete, reboot the ODU to run the newly loaded software image.
See Section 8.6 “Reboot”.