Motorola Symbol DS9808 Reference Guide

10 - 2 Symbol DS9808 Product Reference Guide
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 10-1 lists the defaults for all symbologies parameters. To change the default values, scan the appropriate bar
codes in this guide. These new values replace the standard default values in memory. To recall the default
parameter values, scan the Set Default Parameter on page 4-4.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, and miscellaneous default
parameters.
Table 10-1 Parameter Defaults
Parameter
Parameter
Number
Default
Page
Number
UPC/EAN
UPC-A 01h Enable 10-7
UPC-E 02h Enable 10-7
UPC-E1 0Ch Disable 10-8
EAN-8/JAN 8 04h Enable 10-8
EAN-13/JAN 13 03h Enable 10-9
Bookland EAN 53h Disable 10-9
Decode UPC/EAN/JAN Supplementals (2 and 5 digits) 10h Ignore 10-11
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
F1h 43h
F1h 44h
10-13
UPC/EAN/JAN Supplemental Redundancy 50h 10 10-13
Decode UPC/EAN/JAN Supplemental AIM ID F1h A0h Combined 10-14
Transmit UPC-A Check Digit 28h Enable 10-14
Transmit UPC-E Check Digit 29h Enable 10-14
Transmit UPC-E1 Check Digit 2Ah Enable 10-15
UPC-A Preamble 22h System Character 10-16
UPC-E Preamble 23h System Character 10-16
UPC-E1 Preamble 24h System Character 10-18
Convert UPC-E to A 25h Disable 10-19

Motorola Symbol DS9808 Specifications

General

Brand	Motorola
Model	Symbol DS9808
Category	Barcode Reader
Language	English