Motorola Symbol DS9808 - Page 296

A - 4 Symbol DS9808 Product Reference Guide
Emulate Keypad Disable 6-9
Emulate Keypad with Leading Zero Disable 6-10
USB Keyboard FN1 Substitution Disable 6-10
Function Key Mapping Disable 6-11
Simulated Caps Lock Disable 6-11
Convert Case No Case Conversion 6-12
RS-232 Host Parameters
RS-232 Host Types Standard
1
7-6
Baud Rate 9600 7-7
Parity Type None 7-9
Data Bits 8-Bit 7-9
Check Receive Errors Enable 7-10
Hardware Handshaking None 7-10
Software Handshaking None 7-12
Host Serial Response Time-out 2 Sec 7-14
RTS Line State Low RTS 7-15
Beep on <BEL> Disable 7-15
Intercharacter Delay 0 msec 7-16
Nixdorf Beep/LED Options Normal Operation 7-17
Ignore Unknown Characters Send Bar Code 7-17
IBM 468X/469X Host Parameters
Port Address None Selected 8-4
Convert Unknown to Code 39 Disable 8-5
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM PC/AT& IBM PC
Compatibles
1
9-4
Country Types (Country Codes) North American 9-5
Ignore Unknown Characters Transmit 9-7
Keystroke Delay No Delay 9-7
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.