Motorola Symbol DS9808 - Page 299

Standard Default Parameters A - 7
Set Lengths for Code 11 1Ch, 1Dh 4 to 55 10-37
Code 11 Check Digit Verification 34h Disable 10-39
Transmit Code 11 Check Digit(s) 2Fh Disable 10-40
Interleaved 2 of 5 (ITF)
Interleaved 2 of 5 (ITF) 06h Disable 10-40
Set Lengths for I 2 of 5 16h, 17h 14 10-41
I 2 of 5 Check Digit Verification 31h Disable 10-43
Transmit I 2 of 5 Check Digit 2Ch Disable 10-43
Convert I 2 of 5 to EAN 13 52h Disable 10-44
Discrete 2 of 5 (DTF)
Discrete 2 of 5 05h Disable 10-44
Set Length(s) for D 2 of 5 14h, 15h 12 10-45
Codabar (NW - 7)
Codabar 07h Disable 10-47
Set Lengths for Codabar 18h, 19h 5 to 55 10-47
CLSI Editing 36h Disable 10-49
NOTIS Editing 37h Disable 10-49
MSI
MSI 0Bh Disable 10-50
Set Length(s) for MSI 1Eh, 1Fh 4 to 55 10-50
MSI Check Digits 32h One 10-52
Transmit MSI Check Digit 2Eh Disable 10-52
MSI Check Digit Algorithm 33h Mod 10/Mod 10 10-53
Chinese 2 of 5
Chinese 2 of 5 F0h 98h Disable 10-53
Table A-1 Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.