Standard Default Parameters A - 9
UPC Composite Mode F0h 58h Never Linked 10-66
Composite Beep Mode F0h 8Eh Beep As Each Code Type is
Decoded
10-67
GS1-128 Emulation Mode for UCC/EAN
Composite Codes
F0h ABh Disable 10-67
2D Symbologies
PDF417 0Fh Enable 10-68
MicroPDF417 E3h Disable 10-68
Code 128 Emulation 7Bh Disable 10-69
Data Matrix F0h 24h Enable 10-70
Data Matrix Inverse F1h 4Ch Regular 10-70
Maxicode F0h 26h Disable 10-71
QR Code F0h 25h Enable 10-71
QR Inverse F1h 4Bh Regular 10-72
MicroQR F1h 3Dh Enable 10-72
Aztec F1h 3Eh Enable 10-73
Aztec Inverse F1h 4Dh Regular 10-73
Symbology-Specific Security Levels
Redundancy Level 4Eh 1 10-74
Security Level 4Dh 0 10-76
Intercharacter Gap Size F0h 7Dh Normal 10-77
Report Version 10-77
Macro PDF
Flush Macro PDF Buffer 10-78
Abort Macro PDF Entry 10-78
Table A-1
Standard Default Parameters Table (Continued)
Parameter
Parameter
Number
Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.
To Next Page
Loading...
