Motorola Symbol DS9808 - Page 43

User Preferences & Miscellaneous Digital Scanner Options 4 - 3
Multifunction Triggering (DS9808-LR/LL Only) Single Trigger 4-19
Trigger A F1 77h Laser Preferred Decoding 4-20
Trigger B F1 78h Trigger A value 4-21
Trigger A + B F1 79h Ignore 4-22
Laser Preferred Timeout F1 7Dh 1.5 seconds 4-23
Dual Trigger Debounce Timeout F1 7Ah 0.05 seconds 4-23
Dual Trigger Processing F1 7Bh Wait 4-24
Host Trigger Mode (DS9808-LR/LL Only) F1 7Ch Imager Decoding 4-24
Picklist Mode F0h 92h Disabled Always 4-26
Continuous Bar Code Read F1 89h Disable 4-27
Decode Session Timeout 88h 9.9 Sec 4-27
Timeout Between Decodes, Same Symbol 89h 0.5 Sec 4-28
Timeout Between Decodes, Different Symbols 90h 0.2 Sec 4-28
Fuzzy 1D Processing F1h 02h Enable 4-29
Hand-Held Decode Aiming Pattern F0h 32h Enable 4-30
Hands-Free Decode Aiming Pattern F1h 4Eh Enable
for PDF 4-31
Presentation Mode Field of View F1h 61h Full 4-32
Decoding Illumination F0h, 2Ah Enable 4-33
Miscellaneous Options
Transmit Code ID Character 2Dh None 4-34
Prefix Value 63h, 69h 7013 <CR><LF> 4-35
Suffix 1 Value
Suffix 2 Value
62h 68h
64h 6Ah
7013 <CR><LF> 4-35
Scan Data Transmission Format EBh Data as is 4-36
FN1 Substitution Values 67h 6Dh Set 4-37
Transmit “No Read” Message 5Eh Disable 4-38
Table 4-1 User Preferences Parameter Defaults (Continued)
Parameter
Parameter
Number
Default
Page
Number