12
English
The LED Status Indicator
The LED indicator shows the states of your MTH800.
To Enter the Menu Items
1. Press .
2. Scroll to the required item, press Select or to select.
To Return to the Previous Level
Press Back or .
To Exit the Menu Items
Press .
Type of Call Menu Setting Key Use
Half-duplex call
(Group*/Private)
Menu > Setup > Group
Audio > Spkr Cntrl
Speaker On/Off for group and
private calls
Menu > Setup > Group
Audio > Always Loud Speaker On/Off for private call
Full-duplex call
(Private/Phone/
PABX
-------- Controls speaker/earpiece of
the on-going call.
* In an Emergency Group Call, the voice sounds from the speaker regardless of
the speaker setting.
Indicator Status
Solid green In use
Flashing green In service
Solid red Out of service
Flashing red Connecting to a network/Entering DMO
Solid orange Transmit Inhibit (TXI) in service
Flashing orange Incoming call
No indication Switched off
Your MTH800 may exit if no key presses are detected for a time-out period.
M
E
N
U
6802972C30.book Seite 12 Montag, 12. Juli 2004 4:11 16
To Next Page
Loading...
