25
English
Selecting TMO or DMO Operation
Entering TMO or DMO
Enter TMO or DMO in one of the following ways:
• From the Home display press Optns and select Direct Mode if
the MTH800 is in TMO.
• From the Home display press Optns and select Trunked Mode if
the MTH800 is in DMO.
• Press and select More...> Networks > Trunked Mode if
the MTH800 is in DMO.
• Press and select More...> Networks > Direct Mode if the
MTH800 is in TMO.
• Press the TMO/DMO one-touch button (if programmed by your
Service Provider).
You can make and receive the following types of calls when the
MTH800 operates in Trunked Mode
• Group Calls
• Private Calls
• Phone Calls
• PABX Calls—local (office) extension calls.
• Emergency Calls.
You can make and receive Group Calls
when the MTH800 operates
in Direct Mode. This includes Emergency Group Calls.
The MTH800 returns to the Home display when there is no activity
for a few seconds.
Your terminal can alert you of an incoming call. Select the alert settings in
the Vibrate menu and Tones menu items.
M
E
N
U
M
E
N
U
6802972C30.book Seite 25 Montag, 12. Juli 2004 4:11 16
To Next Page
Loading...
