29
English
Private, Phone, and PABX Calls
Creating a Contact
1. From the Home display, press Contcs. Select [New Contact].
2. Enter name. Press Ok to confirm.
3. Press / and select the type of stored number (such as
Private).
4. Enter number (#). Press Ok.
5. Continue to enter other types and numbers, as you may keep
several numbers (Private, Mobile, Home, Work, PABX, Other) for
the same person under the same contact name.
6. When finished, press Done. Press Back to return to Home
display.
How to Dial
Dialing a Number
1. From the Home display dial a number.
2. Press CType repeatedly to select the call type (Private, Phone,
or PABX).
3. Press PTT or depending on the call type.
Dialing via the Contact List
You can also use the contact list to select a number you previously
stored. Press the Contcs key and search the stored number by
scrolling ( or ) or by entering the first character of the
contact name. If the contact has more than one number, use /
to select the number.
If you are in an on-going Group Call wish to make a new call, press to
ignore the current call. Dial the number
.
6802972C30.book Seite 29 Montag, 12. Juli 2004 4:11 16
To Next Page
Loading...
