Motorola TETRA MTH800 - Getting Started; Battery; Installing the Battery; Replacing the Battery

21
English
Getting Started
Battery
Installing the Battery
1. Remove the battery from its protective clear plastic case.
2. If necessary, remove the battery cover as shown below.
3. Insert the battery top into the compartment as illustrated.
4. Carefully press the battery silver bottom downward until it clicks
into place.
5. Replace battery cover.
Replacing the Battery
1. To remove the battery cover, push down the cover button. Slide
the cover away.
2. Push retaining clip up and then lift the top of the battery out.
3. Replace the battery.
RETAINING CLIP
6802972C30.book Seite 21 Montag, 12. Juli 2004 4:11 16