Motorola V3

37
Learning to Use Your Phone
Setting Primary and Secondary Text Entry Modes
You can set different primary and secondary text entry
modes, and easily switch between modes as needed when
you enter data or compose a message.
Press
M > Entry Setup in a text entry screen. Select
Primary Setup or Secondary Setup , and choose:
Using Capitalization
Press 0 in a text entry screen to change text case.
Indicators at the top of the display show the capitalization
setting:
iTAP iTAP
®
software predicts each word as
you enter it, to simplify and speed up
text entry.
Tap Enter individual letters and numbers
by pressing a key one or more times.
Tap Extended Enter individual letters, numbers, and
symbols by pressing a key one or
more times.
None Hide the Secondary setting if you prefer
not to set a secondary text entry mode
(only available for
Secondary Setup ).
U = no capital letters V = capitalize next
letter only
T = all capital letters
38
Learning to Use Your Phone
Text Entry Mode Indicators
In Primary or Secondary text entry mode, indicators at the top
of the display show the text entry setting:
The following indicators identify
Numeric or Symbol entry
mode:
Using iTAP
®
Mode
iTAP mode lets you enter words using one keypress per
letter. The iTAP software combines your keypresses into
common words, and predicts each word as you enter it.
For example, to type “
the ,” you would press
843 . The iTAP software recognizes that the
most common word formed by this keypress combination
is “
the ,” and predicts that “ the ” is the word you are spelling.
Other common words or word fragments that can be
spelled by the same keypress combination are presented
as alternate choices at the bottom of the display.
Primary Secondary
gm Tap, no capital letters
hq Tap, capitalize next letter
only
fl Tap, all capital letters
jp iTAP, no capital letters
kn iTAP, capitalize next
letter only
io iTAP, all capital letters
W = numeric mode [ = symbol mode