Motorola V300 - First Steps

First Steps
First Steps
For best results, before using your V300 Camera for the first time:
1. Fully charge the camera and removable battery.
2. Ensure the camera software is current using Evidence Library (EL).
To charge the camera:
n Dock the camera in a Transfer Station II or WiFi base.
Note: The camera battery charges any time it is docked. A blinking LED means
camera is charging. A solid green LED on any of the bases means the battery is
fully charged.
To configure the camera:
1. Dock the camera in a Transfer Station II or WiFi base.
2. Using EL, create and/or assign a configuration and an officer to the docked V300 Camera.
When the configuration is applied, the screen displays Checked out to on the first line and the
officers name on the second line. The camera reboots to apply the configuration and displays the
same information then transitions to an idle screen.
See the Evidence Library Online Help for more information.
V300 Body-Worn Camera User Guide
WGD00169 Revision C
15