Docking the V300 Camera
5 Individual slot power LEDs
6 Transfer Station II power LEDs
While docked:
l The camera communicates to the EL software that it has recorded events to upload. The Transfer
Station II can upload from eight cameras simultaneously.
l EL sends commands and requests to the camera:
o
Mark any imported recorded events as import confirmed
Events confirmed as imported are immediately unprotected. This makes the storage space
available to be reused.
o
Update the configuration
o
Stage a firmware upgrade
After staging, the upgrade is immediately applied to the camera.
o
The WiFi base firmware can be downloaded to the V300 camera while docked in the Transfer
Station II
When you undock the camera and battery from the Transfer Station II, they are ready for normal
operation.
Docking the V300 in a WiFi base
You can dock the V300 Camera in one direction only. The camera pairs with that base and with
any other V300 Cameras that pair with the same WiFi base.
When you dock the camera and battery in a WiFi base that is connected to Evidence Library (EL),
the camera communicates to EL that it has recorded events to upload
Note: The camera must be configured to upload events directly to EL from the WiFi
base. See your EL online help.
l Recorded events are uploaded to EL
l EL sends commands and requests to the camera as applicable:
l Mark any imported recorded events as import confirmed
The events confirmed as imported are immediately unprotected. This makes the storage space
available to be reused.
l Stage a firmware upgrade
After staging, the upgrade is immediately applied to the camera.
The camera is ready for operation when you undock it from the WiFi base.
32
V300 Body-Worn Camera User Guide
WGD00169 Revision C
To Next Page
Loading...
